Brand
RYNOX
Performance:
- 15000mm Waterproof: The shell is made from a nylon fabric rated for waterproofing up to 15000mm, perfect for Indian monsoons on a motorcycle.
- Double Ripstop Nylon: The Double Ripstop weave of the abrasion-resistant nylon shell prevents small tears from spreading and lengthens the life of the jacket.
- 5000g/24hr Breathability: Nylon fabric is breathable and helps manage sweat and condensation. The waterproof membrane allows water vapor to pass through but keeps water out, keeping you dry and cool.
Increase Visibility:
- Hi-Viz Green Shell: When it rains heavily, visibility typically goes down. The Hi-Viz shell of the rain jacket keeps you visible to oncoming traffic.
- Blacked-Out Retro-Reflective Trims: Sometimes, you need to continue riding after dark. The blacked-out retro-reflective trims light up in the headlight of oncoming traffic and keep you visible.
Construction:
- Made for Motorcycling: The H2Go Pro 3 Rain Jacket is engineered, cut, and sized to be worn easily over a riding jacket.
- Independent Destination Jacket: The H2Go Pro 3 Rain Jacket can also be worn as an independent rain jacket.
- Pre-Curved Arms: Ideally pre-curved for the riding posture, the snugger fit of the arms reduces wind resistance and prevents fatigue.
- Heat-Sealed Seams: Precision-sealed seams prevent the ingress of water at the seams and keep you dry.
- DryCore WR Zipper: Water Resistance zipper, covered with a wide gutter flap with velcro that lets you wear the jacket easily and keeps you dry once the jacket is zipped up.
- 3-Panel Hood with Cord Lock: The 3-panel design makes the hood compact and ergonomic. Cord Lock lets you cinch the hood to your preference.
- Independently Actuating Hood: The hood actuates independently of the collar and provides more flexibility for head movement.
- Collapsible Hood: Tuck the hood away while riding, or wear the hood under your helmet. The collapsible hood gives you the freedom to decide.
Comfort:
- Rear Exhaust Vents: Inverted rear exhaust vents on the shoulder blades assist in the removal of hot and humid air from inside the jacket, and keep you cool and dry.
- Cord Lock On Hem: Cord Locks on the bottom, on either side, let you adjust the fit of the jacket to your preference.
- Gloves Friendly Cuffs: Elasticated cuffs with forearms wide enough to fit over gloves lets you easily pull the sleeves of the H2Go Pro 3 Rain Jacket over your riding jacket and gloves.
- High Collar: The height of the collar is designed to prevent capillary water ingress while riding, from under the chin of the helmet.
- Extremely Lightweight: Weighs only 300 gms.
Please Note:-
Logo Applications and Reflective Panels are not been covered under warranty.
In Stock
₹1,450.00
MRoadies offers warranty on most products against manufacturing defects. Warranty period will be considered from the date of purchase by the customer. Helmets carry a warranty of 2 years against manufacturing defects only.
Warranty Terms & Conditions:
The claim must be accompanied with the warranty card and the purchase receipt from our authorized dealer or reseller.
Products purchased from sellers other than our authorized dealers will not be eligible for warranty.
Products purchased under discounts or offers are not covered under warranty.
Warranty is limited to either repair or replacement of the product. PSI will be the deciding authority on the course of action.
Customer must be ship the product to our Chennai office. PSI will inspect the product and approve or reject the claim.
Product will be shipped back to the customer free of cost.
Once the claim is approved, the product will be repaired or replaced based on the availability of spares and products. MRoadies cannot be held liable for non-availability of spares or products.
Color of the spares used in case of a repair might not completely match that of the original product color.
If the particular product had been discontinued, MRoadies will send an equivalent model to the customer. Under no circumstance a refund will be made.
Any replacement done during the warranty period will not extend the warranty of the product.
Warranty cannot be claimed under following circumstances:
Wear and tear due to regular usage.
Damage caused by an accident or a fall.
Physical damage to the helmet by dropping it or by any other mishandling.
Color fading due to usage or exposure to sun. High viz colors are likely to fade faster on sun exposure.
Problems occurring due to lack of maintenance.
Usage under atypical conditions.
Any modifications or customizations to the helmet will void its warranty.
Use of paint, adhesives, glue, screws, etc will also make the warranty void.
Application of chemicals that could harm the product.
Scratches or marks occurring due to usage.
Scratches and marks on the visor.
Color chipping on the EPS.
Rider experiencing subjective issues like fit, comfort, noise, aerodynamics, etc are not covered under warranty.
Helmet accessories like cheek pads, chin curtains, pinlock, etc. are not covered under warranty.
MRoadies cannot be held liable for any cosmetic damage the product may have while purchasing. Customers are advised to check the product thoroughly before purchasing.
MRoadies offers free domestic shipping on all orders. International shipping will be levied at actuals. Domestic buyers please note that your order will be shipped within 3 working days of orders placed through registered domestic courier companies or speed post only. MRoadies cannot be held responsible for any delivery delays caused by the courier company. mroadies only guarantees to handover the order to the courier company or postal office within 3 working days from the date of the order.
MRoadies isn’t liable if any damage is caused to the product during transit. Customers are advised not to accept the order if the package is damaged or has been tampered with.
Your custom content goes here. You can add the content for individual product
Related products
Reviews
There are no reviews yet.